• What temperatures can the Ultra-Drain Seal handle?

• Where can they be used?

• How long can they be left out?

• Can it be used on a textured surface?

• Are custom sizes available?

• Can they be cut to size?

• How should the Drain Seal be stored?

• Can I reuse the Ultra-Drain Seal?

• How do I clean the Drain Seal after it's been used?

• What temperatures can the Ultra-Drain Seal handle?  The typical operating range is -10°F to 220°F.  (-23°C to 104°C)

Back to the top

• Where can they be used?  Ultra-Drain Seals can be used on storm drains, floor drains, trench drains or any flat area where it is necessary to keep out spills, liquids or other contaminants.  They should not be used in areas where they will be driven over by vehicles or equipment.

Back to the top

• How long can they be left out?  Due to the urethane construction of the Ultra-Drain Seal, they should not be left outdoors for an extended period of time.  Extended UV exposure will degrade the product.  As a spill response product, it should only be used until the spill has been cleaned up or, if used as a preventative measure, until the potential spill source is removed.  If used, indoors, the Ultra-Drain Seal can be used for long-term applications but should be inspected periodically for proper placement, damage, etc.

Back to the top

• Can it be used on a "textured" surface?  The Ultra-Drain Seal is made from a soft, pliable urethane material and can be used on a number of different types of surfaces.  Ideally, the surface would be smooth and free of debris providing the best seal possible.  This is not always possible especially in a spill response type situation.  On asphalt, uneven or textured surfaces, the seal may not be perfect but should still be very effective.

Back to the top

• Are custom sizes available?  Custom sizes are available but minimum quantities are required.  Please call (800) 353-1611 for details.

Back to the top

• Can they be cut to size?  Yes, Ultra-Drain Seals can be cut to fit drains with scissors or a utility knife.  Please note that the Drain Seal should be at least 6" larger than the drain it is covering to provide adequate coverage.

Back to the top

• How should the Drain Seal be stored?  Store the Ultra-Drain Seal in the box that it comes in.  Keep it rolled up with the plastic film on both sides of the unit.  The Ultra-Drain Seal should be stored at room temperature out of direct sunlight.  The Drain Seal WallMount is also available for storage and a quick, "grab and go" solution for spill responders. 

Back to the top

• Can I reuse the Ultra-Drain Seal?  Yes, the Drain Seal can be reused repeatedly.  The unit must be cleaned and allowed to dry prior to storage/reuse.

Back to the top

• How do I clean the Drain Seal after it's been used?  In most instances soap and water is all that is required to properly clean the Drain Seal after use.