Ultra-Track Pans®
|
 |
|
Capture
Hazardous Spills From Railroad Tanker Cars |
|
|
|
|
|
|
-
Ultra-Track
Pans
have been designed to provide spill containment at industrial rail sidings
and locomotive maintenance facilities. Available in virtually any
length, Ultra-Track Pans may be used to collect small spills and leaks OR to
capture and channel off significant spills caused by defective equipment or
a major overflow.
-
Prevent
Costly Cleanup and Regulatory Fines
-
Modular
Design - Center and Side Pans are 53.5" long; containment areas can be
easily assembled to any length desired
-
All-polyethylene
Construction - Rugged Track Pans withstand harsh chemicals and are designed
to function in temperatures ranging from -40°F to +140°F
-
Sealed
System - Polyethylene gaskets keep spills from falling between the rails and
Pans.
-
Trucks
and other vehicles can drive over Track Pans with grates in place*
-
Economical,
easy to install
-
Modular
Track Pan design can be customized to meet your specific needs.
|
|
|

|
-
Optional
Track Pan Covers Keep Rainwater Out of the Pans, Providing Effective
Stormwater Management.
-
Polyethylene
Covers are left in place until the railcar(s) arrive to be off-loaded
or loaded. Lightweight covers mechanically lock into the polyethylene
decking and will not blow off in windy conditions.
-
Unique
stormwater feature is designed to eliminate "pooling" of rain that
falls on top of the Center Pan Covers; rain is channeled onto the ballast
between the tracks, stays out of the Pans.

|
|
|


|
-
Ultra-Track
Pans
Are Available In Two (2) Models:
-
Low
Maintenance - unlike carbon steel track pans, Ultra-Track Pans will not rust
or corrode. Polyethylene resin is treated with a UV inhibitor, resists
degrading effects of the sun.
-
Low Cost Installation —
Lightweight Track Pans can be easily installed without heavy lifting
equipment, i.e., forklifts, cranes, backhoes, etc. Minimal tools and
labor required.
-
Slip
Resistant Surfaces - Pans, grates and covers have been designed with safety
in mind. All top surfaces resist slips when wet or oily.
-
Long
Work Life - Estimated to perform 20-30 years; longer than fiberglass pans.
-
Meets SPCC and EPA Stormwater
Management Regulations.
-
Also meets New York State
Chemical Bulk Storage Regulation Section 599.17c — Secondary Containment for
Transfer Stations.

*To
drive over Track Pans, firm footing must be beneath the Pans; also must
"ramp up" to Side Pans with asphalt or concrete.
|
|
|
|
ULTRA-TRACK PANS |
| Track Pans with Grates, No Covers |
Track Pan Covers Only |
| Part# 9566 - Center Track Pan with Grates |
Part# 9580 - Cover for Center Track Pan |
Dimensions: 53½" x 53½" x 6"
(1359 mm x 1359 mm x 153 mm) |
Dimensions: 55" x 52 1/2" (1397 mm x 1333 mm) |
| Weight: 112 lbs. (51 kg) |
Weight: 24 lbs. (11 kg) |
| Containment Capacity: 18 gallons (69 L) |
|
Includes: 2 bulkhead fittings, 4 gaskets
and 2 grates |
|
| |
|
| Part# 9576 - Side Track Pan with Grates |
Part# 9581 - Cover for Side Track Pan |
Dimensions: 53½" x 27½" x 6"
(1359 mm x 699 mm x 153 mm) |
Dimensions: 55" x 28 1/4" (1397 mm x 717 mm) |
| Weight: 58 lbs. (26 kg) |
Weight: 11 lbs. (5 kg) |
| Containment Capacity: 19 gallons (72 L) |
|
Includes: 1 bulkhead fitting, 2 gaskets
and 1 grate |
|
| |
|
Complete Systems |
| 9-Foot Systems: |
| Part# 9595 - Two (2) Center Pans, four (4) Side
Pans. No covers |
| Part# 9596 - Two (2) Center Pans with Covers,
four (4) Side Pans with Covers |
| 40-Foot Systems: |
| Part# 9589 - Nine (9) Center Pans, eighteen
(18) Side Pans. No covers |
| Part# 9590 - Nine (9) Center Pans with Covers,
eighteen (18) Side Pans with Covers |
| 60-Foot Systems: |
| Part# 9592 - Fourteen (14) Center Pans,
twenty-eight (28) Side Pans. No covers |
| Part# 9593 - Fourteen (14) Center Pans with
Covers, twenty-eight (28) Side Pans with Covers |
| |
| Options |
| Part# 9584 - Rebar Fasteners with Protective
Caps (20-pack) |
| Part# 9559 - 3" dia. Bulkhead Fitting (for
below grade piping) |
| Part# 9586 - Sorbent Mats, Center Pan (2/set),
10-pack |
| Part# 9585 - Sorbent Mats, Side Pan 20-pack |
Part# 9571 - Grate Only for Center Pan (Left)
Part# 9571 - Grate Only for Center Pan (Right) |
| Part# 9573 - Grate Only for Side Pan |
| |
| Chemical Compatibility Guide |
|
Download
catalog page |
| U.S. Patent Nos. 5,562,047; 6,173,856;
6,305,569 |