Ultra-Berm Builder®

Build a barrier around machinery or equipment that is permanently mounted or cannot easily be moved

Most of UltraTech's spill containment products are designed to be put in place and then have the potential offending "spillers" placed in or on the containment unit. But large, heavy or previously secured/bolted down equipment or machinery can make that very difficult or impossible.

The Ultra-Berm Builder solves that problem. This component system can be built to just about any size and/or shape that might be needed for your spill containment application.

Key Features:
  • Component system provides flexibility to create a semi-permanent, high-visibility custom barrier.
  • Durable, vinyl covering resists oils, coolants, and most chemicals.
  • Cut to length and secure to floor with included sealant, then seal seams with the vinyl adhesive.
  • Economical containment for leaks and spills around machinery and equipment - no need to build expensive cement or angle iron curbs.
  • High-visibility yellow color draws attention to the barrier for increased safety.  
  • Easy removal requires only a flat-bladed shovel.
Kit Contents (p/n 8640):

(2) 25’ Ultra-Berm Builder Walls
(4) Ultra-Berm Builder Corners
(6) Floor Sealant Tubes
(1) 10-foot section Connector Collar 
(1) 8oz. Industrial Vinyl Adhesive

Questions?

Technical stuff.  Inventory.  Lead times.  Local distributor.  We've got the answers.

Contact Us
Questions?

 WARNING: This product can expose you to chemicals including 1-2-Benzenedicarboxylic acid - di-C8-10-branched alkyl esters - C9-rich, which is known to the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov.

Ultra-Berm Builder

Part # Description Dimensions Qty Weight lbs. (kg) Where to Buy
8640 Full Kit 50’ x 5½” x 2” (15.2 m x 140 mm x 51 mm) 1/box 21.0 (9.5)
8641 Straight Section 15’ x 5½” x 2” (4.6 m x 140 mm x 51 mm) 1/box 6.0 (3.0)
8642 Corner 7¼” x 5½” x 2” (184 mm x 140 mm x 51 mm) 2/box 2.0 (1.0)
8643 Connecting Collar 10’ x 4” (3m x 102mm) 1/box 1.0 (0.5)
8644 Floor Sealant (10.3 fl. oz. tube) 6/box 8.0 (3.5)
8645 Vinyl Adhesive (8 oz. can) 1/box 1.0 (0.5)

Product Data Sheet:  Berm Builder

Instructions

SDS - Floor Sealant

SDS - Vinyl Adhesive

Frequently Asked Questions

What is the Berm Builder made of?
The Ultra-Berm Builder is an open-cell foam that is wrapped in vinyl.

 

 

Can I step on the Berm Builder's sidewalls?
Yes, the Ultra-Berm Builder's sidewalls are designed to be able to be stepped on and/or rolled over with light, wheeled equipment. The open-cell foam barrier will spring back after the weight is removed.

 

 

What if the area I need containment for is larger than what is covered by the "Full Kit"?
You can always add more Straight Sections (Part# 8641) and/or more Corners (Part# 8642) or whatever is needed for your particular application. All of the components and accessories for the Ultra-Berm Builder are available separately.

 

 

Is the installation of the Berm Builder permanent? Can I remove it?
The Ultra-Berm Builder is meant to a "long-term" installation. Should it become necessary, it can be removed using a flat-bladed shovel.

 

 

What surfaces can the Ultra-Berm Builder be used on?
The Berm Builder is designed for use on flat, smooth surfaces.

Regulations
  • Spill Prevention, Control and Countermeasure Act (SPCC)