Ultra-Drain Guards®

Reusable Model

Capture dirt and sediment at construction sites and other “high erosion” areas

Storm drains on or around construction sites are susceptible to large quantities of dirt and sand. In those circumstances, a higher capacity catch basin insert may be the better solution.
 
While it won't capture hydrocarbons like many of the other Ultra-Drain Guards, the Reusable Model is capable of containing up to five hundred (500) pounds of silt, soil, and dirt. So you can spend less time emptying out your catch basin inserts and more time working that construction.
Key Features:  
  • Rugged polypropylene construction can be easily rinsed and reused.
  • Deep accumulation pocket (36”) can hold up to 500 lbs. of soil, sand, sediment, and dirt.
  • Designed for easy removal with a backhoe, forklift, or other equipment.
  • Custom sizes available.
 Compliance:
  • Helps comply with NPDES, 40 CFR 122.26 (1999) and TMDL requirements.

Questions?

Technical stuff.  Inventory.  Lead times.  Local distributor.  We've got the answers.

Contact Us
Questions?

 WARNING: This product (Curb-Style) can expose you to chemicals including lead, which is known to the State of California to cause reproductive harm. For more information, go to www.P65Warnings.ca.gov.

Ultra-Drain Guards, Reusable Model (Standard)

Part # Style Dimensions in. (mm) Weight lbs. (kg) Where to Buy
9341 Standard Catch Basin 24 x 24 (610 x 610) 1.0 (0.5)
9340 Standard Catch Basin 24 x 36 (610 x 915) 1.0 (0.5)
9342 Standard Catch Basin 24 x 48 (610 x 1,220) 1.0 (0.5)

Ultra-Drain Guards, Reusable Model (Curb-Style)

Part # Style Dimensions in. (mm) Weight lbs. (kg) Where to Buy
9332 Curb-Style 24 x 24 (610 x 610) 3.0 (1.5)
9330 Curb-Style 24 x 36 (610 x 915) 3.0 (1.5)
9331 Curb-Style 24 x 48 (610 x 1,220) 3.0 (1.5)

More info / Downloads

Approved by the Oregon Department of Transportation

Instructions

Specifications

Not sure which Drain Guard to choose?  Take a look at this comparison of all of the models we offer.

The Path to the Perfect Product

Frequently Asked Questions

Why would I choose the Reusable Drain Guard over another model?
Because of its extraordinary capacity (up to 500 lbs), the Reusable Drain Guard is an excellent choice where the potential for sediment, sand, soil, and dirt is great and there is little or no concern for capturing hydrocarbons.  For this reason, the Reusable Drain Guard is often used on construction sites.

Five hundred pounds is a lot of weight.  Will the grate be able to hold the Drain Guard in place with that kind of load?
This will be dependent from catch basin to catch basin depending on the design, weight, and size of the grate, the fit of the grate and other factors.  However, it can and has been done.  For added security, rebar can be inserted into the removal flap pockets and left in place (these will be necessary during removal of the Drain Guard).

What is the flow rate for this Drain Guard?
When new, the flow rate for the Reusable Drain Guard is 695 gals/min/ft².  For more info, please check out these specifications.

How am I supposed to remove the Reusable Drain Guard when it is full?
Once rebar has been inserted into the removal flap pockets, the unit can either be removed by hand (at least two people) or, for larger loads, a backhoe, forklift or other equipment should be used.

Why doesn't this catch basin insert absorb oil and other hydrocarbons like your other Drain Guards?
In order to be able to contain very large amounts of sand, silt, and sediment, it is necessary to use a polypropylene material to make the Reusable Model Drain Guard.  While this is obviously a very strong, durable and heavy-duty material it does not have the oil-absorbing capabilities of the geotextile material that is used for most of our other Drain Guard models.

Regulations
  • 40 CFR 122.26