Ultra-Drip Diverters®

Pipe Drip Diverter

Channel pipe leaks away from plant personnel and machinery

Leaking pipes can be annoying, frustrating and potentially dangerous.  The Pipe Leak Diverter captures leaks from pipes and can route them using a standard hose (not included) to a drain, sink or container.

  • Keep fluid leaks off the floor — eliminate slip hazards and chemical exposure.
  • Large 18” diameter opening captures overhead leaks, big and small.
  • Bottom fitting connects to a standard garden hose, allows fluids to be collected in a drum or tank.
  • Rugged, coated vinyl construction — ships complete with bungee cords and hooks for quick installation.


Pipe Drip Diverter


Technical stuff.  Inventory.  Lead times.  Local distributor.  We've got the answers.

Contact Us

 WARNING: This product can expose you to chemicals including Folpet, which is known to the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov.

Ultra-Pipe Drip Diverter

Part # Description Dimensions in. (mm) Capacity gal. (L) Weight lbs. (kg) Material Where to Buy
1780 Pipe Drip Diverter 18 dia. x 18 (457 x 457) 7 (26) 2.0 (1.0) 10 oz. vinyl


Part # Description Dimensions Where to Buy
1782 Drainage Hose, Green 25’ L (7,620 mm)
1792 Drainage Hose, Clear 25’ L (7,620 mm)
Frequently Asked Questions

Do the Pipe Drip Diverters come with bungee cords?
Yes, each unit comes with a 4-pack of rubber straps. 


What size is the hose attachment?
The hose attachment is designed to be used with a standard 3/4" (garden hose) fitting.


Is the hose included? 
No, the hose is optional (Part# 1782 - 25' L Green hose.  Part# 1792 - 25'L Clear hose).  It will also work with any standard garden hose with a 3/4" fitting.


Do you have any other sizes? 
While we do not have any other size Pipe Drip Diverters, we do have the Ultra-Roof Drip Diverter which is very similar and available in a number of different sizes.


Is this product heat resistant? What material is it made from?
This product passes the Heat Resistance test (180 deg Fahrenheit for 5 minutes). It is also approved by the California Fire Marshal (Pass #FA51205). The manufacturer of the material runs a Lacing test on the vinyl film in an embroidery hoop in over at 320 degrees F for 7 minutes and it cannot fall apart.

We highly recommend testing it in the actual heat application prior to use.


Can I buy just the hose attachment?
Yes, replacement hose attachments are available.  Please contact us for more information.