Ultra-Oil Stain Remover®

Remove oil stains from asphalt, brick and unsealed concrete

Absorbent pads and wipes only solve a portion of a cleanup problem. In many situations, finishing the job right requires removing unwanted stains from a surface.

UltraTech’s oil stain remover was created to remove embedded stains caused by oil, grease, hydraulic fluid, food grease and other oil-based materials from concrete (sealed or unsealed), asphalt, and brick.


Product Details:

  • Environmentally-Friendly – citrus based, biodegradable and phosphate-free.
  • Available in two sizes – 32 oz. bottle for frequent use areas or industrial applications. And a smaller 16 oz. bottle for smaller stains (perfect for spill kits).
  • 32oz bottle treats an area approximately 6 - 7 square feet. 16oz bottle treats an area approximately 1 ½ - 3 square feet.
  • Also works on carpet and other types of flooring.
         

 

 

Questions?

Technical stuff.  Inventory.  Lead times.  Local distributor.  We've got the answers.

Contact Us
Questions?

Instructions:  Always test a small area before use. Shake well. Do not use on wet surfaces. For best performance, use above 60°F (16°C) and provide maximum ventilation.

  1. Scrape off buildup and sweep area.
  2. Apply to stain, extending one inch beyond the perimeter. For initial treatment, no scrubbing is required.
  3. Allow to dry completely to powder (5-8 hours or longer depending on temperature, humidity, and ventilation).
  4. Sweep up. If area still appears dark, provide adequate ventilation and allow moisture to evaporate.
  5. If stain remains, reapply, scrub with a stiff-bristled brush, and repeat steps 3 and 4. When removing stains from asphalt, a second application will most likely be needed.


ATTENTION: Prior use of other cleaners may inhibit performance.
 

COVERAGE: A 32oz bottle treats an area approximately 6 - 7 square feet. A 16oz bottle treats an area approximately 1 ½ - 3 square feet. CAUTION: Provide maximum ventilation during use.


Do not mix with other chemicals. KEEP OUT OF REACH OF CHILDREN AND PETS. Avoid contact with grass or plants. Avoid inhalation of dust when sweeping. Avoid eye and skin contact. EYE CONTACT:


Flood eyes repeatedly with water and call physician. IF SWALLOWED: Do not induce vomiting. Drink a glass of water and call physician immediately.

Ultra-Oil Stain Remover

Part # Size oz. (ml) Quantity Weight lbs. (kg) Where to Buy
5236 16 (473) 1 Bottle 1.5 (0.5)
5226 16 (473) Case of 8 Bottles 10.0 (4.5)
5237 32 (946) 1 Bottle 2.5 (1.0)
5227 32 (946) Case of 6 Bottles 14.0 (6.5)

More info / Downloads

MSDS

Instructions

Frequently Asked Questions

Is Ultra-Oil Stain Remover safe to use?
Yes, Oil Stain Remover is citrus-based and biodegradable.

 

 

How long does it take Oil Stain Remover to work?
The time it takes to remove an oil stain is dependent on how big (deep) the stain is. For stains that have "soaked in" over a period of time, it could take several applications before it is completely removed.

 

 

Is there any prep required before using the Ultra-Oil Stain Remover?
Any excess oil should be wiped up before pouring the Oil Stain Remover. Other than that, no prep is required.

 

 

What surfaces can the Oil Stain Remover be used on?
Ultra-Oil Stain Remove can be used on concrete (sealed or unsealed), asphalt, brick, carpet and other types of flooring. We recommend testing in a small, inconspicuous area to ensure compatibility.