Ultra-Post Protectors®

Put an end to dents, scratches and constant upkeep

Bumper posts and bollards are used to protect storefronts, pedestrian walkways, utility boxes and many other things.  

The Ultra-Post Protectors are polyethylene sleeves that slide over the posts/bollards so they can maintain a presentable appearance or color to match branding.

  • One-piece, lightweight design makes installation quick and easy. Simply slide over existing posts — no tools or hardware required.
  • Bright, safety yellow color adds cosmetic appeal, helps identify entryways for trucks, etc. Custom colors available.
  • All polyethylene construction — no maintenance required.
  • Available in four sizes to accommodate most bumper posts and bollards. Other sizes available upon request.
  • Rugged construction minimizes scratches, dents and other damage.
  • UV inhibitor in resin resists degrading effects of sunlight, for years of service.


Technical stuff.  Inventory.  Lead times.  Local distributor.  We've got the answers.

Contact Us

How to measure your post for an Ultra-Post Protector Plus

Steel pipe used for bollards is measured by the inside diameter. Therefore, the bollard's outside diameter is 1/2" to 5/8" larger. To purchase the correct post sleeve:

  1. Measure exact post circumference with flat tape.
  2. Divide the circumference by 3.14 to get the diameter of the post in inches.
  3. In ordering information, find the most suitable post diameter range.

Ultra-Post Protectors

Part # For Posts Dia. x H in. (mm) Outside Dia. in (mm) Inside Dia. in (mm) Nominal Thickness Weight lbs. (kg) Where to Buy
1525 4 x 52 (102) 5 1/4 (133) 4 15/16 (125) 1/8" 11.0 (5.0)
1526 6 x 52 (152) 7 11/16 (195) 7 3/8 (187) 1/8" 12.0 (5.5)
1527 7 x 52 (178) 8 3/8 (213) 7 7/8 (200) 1/4" 14.0 (6.5)
1528 8 x 52 (203) 9 3/8 (238) 8 7/8 (225) 1/4" 16.0 (7.5)

More info / Downloads

Installation Instructions

Frequently Asked Questions

How do I install an Ultra-Post Protector?
Each Post Protector is delivered with two pieces of patented foam neoprene tape. Apply the neoprene tape around the circumference of the steel bollard 3" down from the top of the post and 3" up from the bottom of the post. Once the tape is applied, slide the bollard cover over, eliciting the sound of air squeezing out between the post and sleeve as it creates a vacuum seal. If the above directions are followed correctly, the Ultra-Post Protector should fit tight with no gaps.


Are there any other colors available?  Do you do custom colors?
Other colors are available.  Custom colors are also available but do require a minimum order.  Please contact us for more information on these options.


Are there any other sizes available?
Ultra-Post Protectors for the following size posts are also available:

3″, 3 ½”, 4″, 5″, 6″, 7″, 8″, 10″, 12″.  (1/4" thickness).  Please contact us for more information.


Patents Page