Ultra-Spill Berms®

Low Profile

Non-absorbing berm stops machine leaks from spreading

Keep leaking oils and other fluids from machines and equipment from spreading to other areas.  The Ultra-Spill Berm helps contain or divert hazardous material from spreading and causing further damage.

  • Low profile, 1 3/8" tall berm contains leaks, reduces slip hazards.
  • Allows quick and easy cleanup or recycling of liquids.
  • Flexible, urethane design will bend to follow any curve or angle needed.
  • Interlocking end joints create longer lengths and are self-sealing.
  • Non-absorbing polyurethane is easily cleaned for repeated use.
  • Helps comply with NPDES and SPCC

Questions?

Technical stuff.  Inventory.  Lead times.  Local distributor.  We've got the answers.

Contact Us
Questions?

Ultra-Spill Berm Low Profile Model

Part # Description Dimensions Weight lbs. (kg) Where to Buy
2052 Spill Berm, Low Profile 10’ x 2¼” x 1⅜” (3m x 58 mm x 35 mm) 13.0 (6.0)

More info / Downloads

Product Data Sheet:  Spill Berm, Low Profile

Instructions

Chemical Compatibility

Frequently Asked Questions

Can I connect Spill Berms together if I need to protect more than 10-feet?
Yes, built-in connectors allow multiple Spill Berms to be joined together to form larger/wider containment areas.

 

 

Can I cut the Ultra-Spill Berm?
Yes, the Spill Berm can be cut to size with a utility knife or other sharp blade.  Please keep in mind that you will lose the ability to connect the Berm on the sides that have been cut. As always, be sure to wear the appropriate PPE and use caution when cutting.

 

 

Do you have anything taller 1 3/8"?  I have the potential for some fairly large spills.
Yes, the standard Ultra-Spill Berm is 2 1/4" and the Ultra-Spill Berm Plus is 4 1/2" tall.

 

 

Your compatibility chart says 'NR' for the chemical that I'm using.  What exactly does that mean?
'NR' stands for 'Not Recommended'.  HOWEVER, it is worth noting that most chemical compatibility guides (ours included) are based on a one-year immersion test.  In other words, the material being tested is completely immersed in the chemical in question.  After one year, the material is removed and checked for any degradation.  Needless to say, a spill response product is not going to be exposed to a chemical for a year.  So it's possible that the Spill Berm will be effective against a spill of a chemical that is listed as 'NR'. The best way to know for sure is to test for yourself.  Please contact our customer service team and they will be able to send you a no-charge sample.

 

 

Is there a way to make my Spill Berm installation more permanent?
Yes, cyanoacrylates can be used to bond the Ultra-Spill Berm to a surface.  Cyanoacrylates are a family of strong fast-acting adhesives commonly sold under names such as "Super Glue" and "Krazy Glue".

 

 

Can I leave the Ultra-Spill Berm outdoors?
The Spill Berm is made with urethane and will degrade/break down in extended UV exposure.  It is recommended that Spill Berms only be exposed for as long as required to contain and clean-up a spill.  Long-term outdoor use is not recommended.

 

 

How do I clean the Spill Berm after it's been used?
Typically, a standard soap and water mixture is all that is needed to clean a Spill Berm.  Once the Ultra-Spill Berm has been cleaned it should be allowed to air dry and then returned to its original packaging.

 

 

Is the Spill Berm reusable?
Yes, the Ultra-Spill Berm is reusable provided that it has not been exposed to a chemical that has caused any degradation.

 

 

How should the Ultra-Spill Berm be stored?
The Ultra-Spill Berm should be stored in a cool, dry area in the carrying case that it is shipped in.  An optional hard-plastic carrying case is available (Part # 2104) if sturdier packaging is desired.  It is important that the Ultra-Spill Berm does not touch itself because, over time, the touching areas will fuse together.  This can be prevented by using the cardboard separators in the case the unit is shipped in or by wrapping the entire Spill Berm with plastic sheeting. 

 

 

Can I drive over it?
It is not recommended that the Spill Berm be driven over.  The softer nature of the material can be damaged under vehicle tires and other equipment.

Regulations
  • Spill Prevention, Control and Countermeasure Act (SPCC)
  • 40 CFR 122.26