Ultra-Spill Decks®

P6 and P8 Models

One piece spill containment decks for 6 or 8 drums

The Ultra-Spill Decks quickly became one of our most popular product lines.  Part of their popularity is the fact that they are modular - they can be connected in a number of different ways - to meet the needs of the customer. 

But for some folks, simpler is better.  Fewer parts, fewer worries.  For those that prefer their spill containment less complicated, the Ultra-Spill Deck P6 and P8 offer a single piece sump with separate grating on top.  No bulkhead fittings to screw together, no additional spill deck modules to connect.

It's ready to go right off of the shipping truck.  Just load your drums onto it and get on to the rest of your day knowing that your facility is protected from any leaks, drips or spills.
Key Features: 
  • Available in 6-drum and 8-drum models, Ultra-Spill Decks are perfect for satellite collection of hazardous wastes or storage of virgin chemicals.
  • One-piece, molded sump with elevated 2’ x 4’ black grates.
  • Polyethylene grates feature slip resistant, ”diamond plate” surface design.
  • Deck holds up to 1,500 lbs. per drum UDL (uniformly distributed load).
  • Designed for use with Ultra-Spill Deck Loading Ramp (p/n 1089)
  • Meets SPCC and EPA Container Storage Regulation 40 CFR 264.175 Spill Containment Regulations.
  • Protected by the industry’s strongest warranty - Five (5) years against any material or workmanship defects.  Learn more.



Technical stuff.  Inventory.  Lead times.  Local distributor.  We've got the answers.

Contact Us

 WARNING: This product (Ramp - Part# 1089) can expose you to chemicals including nickel, which is known to the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov.

Ultra-Spill Deck P6 / P8

Part # Description Dimensions in. (mm) Uniformly Distributed Loads lbs. (kg) Containment Capacity gal. (L) Weight lbs. (kg) Where to Buy
1175 6-Drum Spill Deck 74¼ x 50 x 5¼ (1,886 x 1270 x 133) 9,000 (4,082) 66 (250) 86.0 (39.0)
1075 8-Drum Spill Deck 98½ x 50 x 5¼ (2,502 x 1270 x 133) 12,000 (5,453) 75 (284) 110.0 (50.0)


Part # Description Dimensions in. (mm) Uniformly Distributed Loads lbs. (kg) Weight lbs. (kg) Where to Buy
1089 Loading Ramp 24 x 32 x 5¾ (610 x 813 x 146) 600 (272) 17.0 (8.0)

More info / Downloads

Product Data Sheet:  6-Drum Spill Deck

Product Data Sheet:  8-Drum Spill Deck

Product Data Sheet:  Spill Deck Ramp

Chemical Compatibility

Care & Maintenance

Instructions - Spill Deck Ramp

The Path to the Perfect Product

The Advantages of Rotomolding

Frequently Asked Questions

How do you get spillage out of the sump?  
We recommend using a pump (UltraTech part# 2345 can be used) to remove any spilled contents from the sump.  (Note:  spillage should be pumped into an approved container)


How does the ramp connect to the decks? 
The Spill Deck Ramp (part# 1089) comes complete with two steel clips that quickly install on the end of the ramp.  These clips hook onto the connecting Spill Deck and keep the ramp from moving or shifting during loading or unloading.



Is the deck slip resistant?
Yes, all grating surfaces on the Spill Decks are slip resistant.



Can the Spill Decks be moved with a forklift or pallet jack?
The Spill Deck can NOT be moved with a forklift or pallet jack. The design of the Spill Deck sidewalls sometimes leads users to think that it is forkliftable or able to be moved with a pallet jack. But what may appear to be forklift pockets are actually supports for the grating. 



Does the Ultra-Spill Deck’s sump capacity meet regulations?  
(Note:  The answer to this question is based on one assumption:  That the Spill Decks are being used with 55-gallon drums).  By themselves, the 1-Drum, 2-Drum and 4-Drum Spill Decks do not meet EPA requirements.  They must be connected to an UltraTech bladder or another Ultra-Spill Deck to increase the total sump capacity to 55 gallons minimum. 



What is the size of the grating? 
The Spill Deck P6 and P8 use a grating that is 48"L x 24"W x 2.5"H.

Can the Spill Deck P6 and P8 be connected to other Spill Decks?
The P6 and P8 Spill Decks are designed as "stand-alone" units.  They cannot be connected to other Spill Decks.

  • 40 CFR 264.175
  • Spill Prevention, Control and Countermeasure Act (SPCC)