Ultra-S3 Hydrogen Sulfide Test Video Transcript

Ten (10) grams of black salt is added to 500 ml of distilled water.  The mixture is then stirred.

Using testing strips the hydrogen sulfide level is measured.  The reading is between 30 and 40 parts per million.

0.3 ml of hydrogen peroxide, and 0.1 ml of Ultra-S3 are added to the solution.

The peroxide and S3 are allowed to oxidize the hydrogen sulfide for 30 seconds.

At 30 seconds another reading is taken and the hydrogen sulfide level is measured.

The reading is zero parts per million.  The Ultra-S3 has removed all of the sulfide in less than 30 seconds.


Watch this video

Return to video list